- Minimum Order Quantity :
- Unit of Measure :
- Price :
- As Per Requirement INR
- Voltage :
- 440 Volt/Ohm (v/ohm)
- Rated Frequency :
- 50/60 Hertz (HZ)
- Application :
- Dismount and mount the Inner Races of Cylindrical Roller Bearings used on the Axles of Railway Rolling Stock and in Traction Motors
- Max. Output Power :
- 25-120 Kilovolt-amp (kVA)
Incepted in the year 1988, we have been engrossed in offering a best in class range of Heavy Duty Bearing Heaters. These heaters are manufactured using quality approved components and innovative techniques at our technically advanced production unit. Ideal for dismounting the inner races of cylindrical roller without any damage, these heaters are highly demanded at railways. Additionally, the offered heaters are acclaimed due to their optimum performance and longer service life. Our valuable clients can buy these Heavy Duty Bearing Heaters from us at most affordable rates.
- Excellent working
- Easy to operate
- Low maintenance
- Dimensionally accurate
Our heavy duty bearing heater of HIR-25/40 model is particularly intended to mount and dismount the internal races of cylinder shaped roller bearings deployed in traction motors and on railway rolling stock axles. The instrument can additionally be deployed for same uses by different businesses.
In addition, our every model is energy saving, fast and sage options to different techniques of heating internal races tube shaped roller bearings.
When a task is made hot with the coil of induction, it obtained magnetism solid sufficient to attract iron dust, iron particles and many more. To handle this process, it is important to remove the remaining magnetism following heating. The outline of our heavy duty bearing heater of HIR-25/40 models allows quick demagnetisation by using its own heating coil. In addition, induction coil has the ability to be used for heating as well as for demagnetisation.
While Alternating Current (A.C) circulations through a loop twisted around a segment, it makes a swaying magnetic field that incites current in the part. The magnetic field opts the easiest course of action and furthermore because of the skin impact, the external periphery of the part gets warmed up more quickly than the main.
Grounded on the aforesaid principle, a ring contracted set on the pole will get warmed all the more quickly inducing a temperature derivative among the tow. The distinction in temperature will make the ring increase to a phase it beats impedance as well as can be descended effectively.
|Model :||Inventum Induction Heater Model 'HIR-25/40'|
|Power Supply :||Voltage : 440V 10%, 50Hz 10% |
Nominal Current : 60 Amps. (25 KVA)
90 Amps. (40 KVA)
|Out Put Voltage & Current :||Voltage : 40 - 60 V. |
Current : 500 amp.(max.) at 50V. (25 KVA),
800 amp.(max.) at 50V.(40KVA).
|Capacity :||25 KVA / 40 KVA|
|Rating :||100% continuous.|
Forced Air Cooling of the Mains transformer and the coolant.
Forced Feed Cooling of the Induction Coil.
Coil Insulation :-
Fiber glass reinforced (B class) hermetically Sealed.
Built-in spring loaded leer operated pools.
|Heating mode :||Temperature and Time (as per selection) mode.|
|Temperature Controls :||0 to 250 o C (max.) using microprocessor based controls adjustable in steps of |
1o C. Sensing Accuracy 5o C.
|Time Controls :||0 to 9.99 minutes adjustable in steps of 0.01 minute. |
Office No-201, Kuber Complex, New Link Road, Opposite-Laxmi Industrial Estate, Andheri West, Mumbai, Maharashtra, 400053, India